MIXING
To mix, you must have the following cans: A-Component, B-Component & Thinner 120
|
- The A-Component is the polyurethane base with the colorant and silica sand, B-Component is the hardener and the last can is the thinning agent.
- DO NOT OPEN B-COMPONENT UNTIL READY TO MIX. THE B-COMPONENT MUST BE CLEAR AS WATER. IF IT HAS A CLOUDY APPEARANCE, DO NOT USE. Contact your dealer or Safety-Skid at 1-800-433-2299 for a free replacement.
- MIX THE ENTIRE GALLON. Do not attempt to mix only half. The B-Component, once exposed to air and humidity, will harden. Add the entire B-Component into the A-Component.
- Next, add 1/2 to 3/4 of the Thinner 120 (10-15 oz.) per gallon set.
- Mix until the coating becomes uniform. For best results, we recommend using a drill with a paint mixing adapter. The remaining thinner will be used to maintain the original consistency throughout application.
If you have any questions or need additional help in applying our product, please contact:
Safety Skid at 1-800-433-2299 or safetyskid@yahoo.com |
